Connecting The Actuator Cable; Table 20: Connection Assignment Of Digital Outputs - WAGO -SPEEDWAY 767 Manual

46 Connecting Data and Supply Cables
Pos : 23.21 /Serie 767 ( WAGO-SPEED WAY)/Ansc hluss D aten- und Versorgungs kabel/I/O-M odule/Ansc hlus s_Aktoren 767- 4802, - 4804_4xM12 @ 5\mod_1249293069390_21.doc x @ 39946 @ 2 @ 1
5.5

Connecting the Actuator Cable

The actuator cable provides power to the connected actuators and transmit the
actuator signals.
When using cables that have not been pre-assembled, make sure that these cables
are equipped with M12 plugs rated to IP67. The following table outlines the
assignment of the actuator connections:

Table 20: Connection assignment of digital outputs

Connection
OUT
X1, X3
Pos : 23.22 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/Sic herheits hinweise/Ac htung/Ac htung: Höchs te Strombel astbar keit der Vers.kontakte(Aktor en) @ 8\mod_1278305558285_21.doc x @ 58898 @ @ 1
The highest current carrying capacity of the supply contacts is 4 A!
Consider that the actuators are supplied from the U
current consumption is to be taken into consideration when determining the
present current demand for the U
Pos : 23.23 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Connection diagramm
OUT
X2, X4
supply line.
A
767-4804/000-800 8DO 24V DC 2.0A IF (4xM12)
supply line. The actuators'
A
WAGO-SPEEDWAY 767
Manual
Version 1.1.0