Notes On Operation - WAGO -SPEEDWAY 767 Manual

14 Important Notes
Pos : 16.23 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/I/O-Modul /Hinweise z um Betri eb 767- xxxx, Teil 1 @ 7\mod_1266921815843_21.doc x @ 51219 @ 2 @ 1
2.4

Notes on Operation

When integrating the 767 module in your machine or system, all the currently
applicable norms, regulations and guidelines shall be observed during all
activities: for example, BGV A3, "Electrical systems and equipment",
DIN EN 418, EN 60204. The emergency stop equipment shall remain effective in
all operating modes of the system and machine.
For protection from electromagnetic interferences
• Connect your system to protective earth (PE), and
Pos : 16.24 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/I/O-Modul /Hinweise z um Betri eb 767-I/O, T eil 2 @ 5\mod_1248180225875_21.doc x @ 38755 @ @ 1
• Ensure that the cable routing and the installation of the fieldbus cable, S-
BUS cable, supply cable, and sensor or actuator cable are correct.
Pos : 16.25 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/I/O-Modul /Hinweise z um Betri eb 767- xxxx, Teil 3 @ 7\mod_1266921848140_21.doc x @ 51222 @ @ 1
The following elements for 24 V supply shall be present:
• Outer lightning protection on buildings
• Inner lightning protection of supply lines and signal lines
• Safe electrical separation of low voltage 24 VDC through PELV (Protective
Extra Low Voltage) or SELV (Safety Extra Low Voltage) voltage sources
Pos : 17 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
767-4804/000-800 8DO 24V DC 2.0A IF (4xM12)
WAGO-SPEEDWAY 767
Manual
Version 1.1.0