Figure 17: Connectors M12 (Exemplary) - WAGO -SPEEDWAY 767 Manual

WAGO-SPEEDWAY 767
767-4804/000-800 8DO 24V DC 2.0A IF (4xM12)
Pos : 23.24 /Serie 767 ( WAGO-SPEED WAY)/Ansc hluss D aten- und Versorgungs kabel/I/O-M odule/Ansc hlus s_Aktoren 767- 48xx, 71xx allgemei n @ 5\mod_1249297826390_21.doc x @ 39983 @ @ 1
To connect the actuators to the digital outputs, proceed as follows:
1. Disconnect the power supply from those devices on which you have
mounted the module.
2. Insert the actuator cable plug into an output socket (3) of the module, and
tighten it via knurled-head screw.
3. Screw a protective cap on all unused ports to ensure that IP67 degree of
protection is provided.
Pos : 23.25 /Serie 767 ( WAGO-SPEED WAY)/Ansc hluss D aten- und Versorgungs kabel/I/O-M odule/Ansc hlüs se_4xM12_Sensor en/Aktor en - Bil d @ 5\mod_1249293750953_21.doc x @ 39979 @ @ 1
3

Figure 17: Connectors M12 (exemplary)

Pos : 24 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 1.1.0
Connecting Data and Supply Cables
3
47