Fixing Surface Area - Ingeteam INGECON SUN PowerMax TL B Series Installation And Operation Manual

Preparation for installing the unit

6.4. Fixing surface area

The unit's excessive weight requires a firm base for support, completely horizontal and leveled, assuring proper
water drainage and avoiding water accumulation.
To perform the installation calculations it is necessary to take into account the loads that affect the environment
conditions, according to the country's regulations.
The following figures only show the vertical loads on each of the supports. The minimum number of supports is six,
as well as two additional optional ones. They differ depending on whether the inverter has the bottom cover kit:
Without bottom cover
2189 N
1930 N
300
Footings
Compulsory support points
Optional support points
Area sealed for DC supply
ABQ2026IQE01_A - Installation and Operation Manual
1107
4363 N
4025 N
998
2739
300 841
Ingeteam
Top view
3225 N
3010 N
300
41