Ingeteam INGECON SUN PowerMax TL B Series Installation And Operation Manual page 150

Ingeteam
CAUTION
Do not install the filter in the gap in the top part of the filter holder tray (see following figure).
Joints, hinges, door locks and other mechanical elements (check, voltage-free)
Check that the joints maintain their elasticity and are not hardening, broken or wearing away.
Check that the unit´s hinges and locks are correct and that the unit maintains their level of protection.
If we observe one of these problems, contact Ingeteam.
Inspect noises and vibrations (inspection, with voltage)
Check that there are not anomalous noises coming from the unit, or vibrations.
If we observe one of these problems, contact Ingeteam.
Download the history of the stops via the INGECON SUN Manager.
INFO
For more information on the process, download the data via the INGECON SUN Manager and see the video
Scope in the videos section of the INGECON SUN Training website (http://www.ingeconsuntraining.info/?page_
id=3269). The access data are:
Username: powermaxb
Password: Manual
The location of the components displayed in the videos may be different. If in doubt, contact Ingeteam.
Check via the proper measurement tools that the waveforms in DC and AC are correct.
Reasons for stopping and quality of the waveform (check, voltage-free)
Download the history of the stops via the INGECON SUN Manager.
Check via the proper measurement tools that the waveforms in DC and AC are correct.
150 ABQ2026IQE01_A - Installation and Operation Manual
Maintenance