Ingeteam
13.3. Wiring requirements for the synchronization connection
Use the cable supplied by Ingeteam.
13.4. Synchronization connection process
1.
Open the folding door of the DCAC connections module.
2.
Connect the fibers in the synchronization cards following the diagrams displayed in section "13.4.1.
Configuring the synchronization". The wiring is lead through the ducts available up to the wiring accesses.
3.
Leading the fiber optics cables through the packing glands, closing them properly and making sure
they´re sealed.
4.
Close the folding door of the DCAC connections module.
88
Connection of the DCAC connections module
ABQ2026IQE01_A - Installation and Operation Manual