Connection/Disconnection Of The Dc Fuses - Ingeteam INGECON SUN PowerMax TL B Series Installation And Operation Manual

Ingeteam

9.5. Connection/disconnection of the DC fuses

After connecting the cables, the DC fuses should be fitted. To install, follow this order:
1. Open the folding door of the DCAC connections module.
2. Remove the mid-frontal cover.
CAUTION
To install fuses in their holders, use a tool designed for this task, as well as for removing them.
3. Insert the fuse guides into the guides on the tool and insert the fuse into its holder, making sure that the
fuse is completely inserted.
4. When it has been installed, remove the tool.
5. Close the housing.
The process for removing the fuses is the reverse of the above.
68 ABQ2026IQE01_A - Installation and Operation Manual
DC connection