Ingeteam
Synchronization of two inverters
To perform the synchronization of two inverters wired according to the following diagram, using the fiber optics
provided by Ingeteam.
Master
1
1-2
a b c
1
d e
Inverter internal wiring
Wiring to do by installer
If an incident on the master inverter (1) on the slave inverter (2) disconnect the fiber optics cable 1-2 from the
connector 2.e and configure this inverter as master via its synchronization card switch.
90
Slave
2
a b c
2
d e
Connection of the DCAC connections module
ABQ2026IQE01_A - Installation and Operation Manual