Table of Contents
Advertisement
Preparation for installing the unit
4.3. Supporting Surface and Fastening
The combiner box must be installed in accordance with the specifications in the following figure. The permitted
positive inclination is between the range of 15 to 90º. The installation with negative inclination (example on the
right) is not permitted.
Reserve a solid wall to which to attach the unit. It must be possible to drill the wall and fit suitable wall anchors
and self-tapping screws to support the unit's weight.
ABI2014IQM03_ - Installation manual
Ingeteam
EN
ES
13
Advertisement
Table of Contents
