Ingeteam INGECON SUN STORAGE 1Play Technical Manual
Hide thumbs
Also See for INGECON SUN STORAGE 1Play:
- Installation and operation manual (72 pages) ,
- Technical manual (29 pages) ,
- Installation and configuration manual (23 pages)
Related Manuals for Ingeteam INGECON SUN STORAGE 1Play
Summary of Contents for Ingeteam INGECON SUN STORAGE 1Play
- Page 1 INGECON SUN STORAGE 1PLAY Use and Settings of the ISS 1Play working with BYD B-BOX H5.1 and H6.4 battery Ingeteam Power Technology S. A. Technical Guide...
-
Page 2: Table Of Contents
INGECON SUN STORAGE 1Play Table of contents Introduction ............................. 3 Connecting the battery pack to the inverter ..................... 4 Wiring of CAN communication wire ....................4 Setting the battery pack .......................... 5 WEB interface of battery ......................... 5 Setting the inverter ..........................6 DC Battery type .......................... -
Page 3: Introduction
INGECON SUN STORAGE 1Play 1 Introduction This document describes the process to configure the INGECON SUN STORAGE 1Play 3TL / 6TL (hereinafter, ISS 1Play) to work with BYD B-BOX H5.1 and H6.4 battery (4-5 modules). The BYD HV and ISS 1Play equipment can be used in the following type of single phase installations:... -
Page 4: Connecting The Battery Pack To The Inverter
INGECON SUN STORAGE 1Play 2 Connecting the battery pack to the inverter The instructions to connect the battery pack to the inverter are described in the “Installation Manual of B-Box HV” Please, take into account the following technical notes: 1) The inverter is turned OFF before connecting the battery pack to the inverter. -
Page 5: Setting The Battery Pack
3.1 WEB interface of battery The inverter type should be configured in the WEB interface. Through the wizard you can configure: Type of the inverter as “INGETEAM” Series Battery Counts should be 4 modules for B-Box H5.1 or 5 modules for B-Box H6.4 type. -
Page 6: Setting The Inverter
To configure the battery type in the inverter settings, please NOT connect the CAN communication wire yet. The communication wire should be connected when the battery type is configured correctly. This can be done using the “Ingecon Sun Manager” software package (downloadable on www.ingeteam.com) or through the display:... -
Page 7: Final Check
MAIN MENU > MONITORING > BATTERY MONIT. STATUS doesn´t show “BMS ERROR” Using Ingecon Sun Manager: OnLine Battery.Status doesn´t show “Error Communication with BMS” If the error is showing, check again the instructions of this guide and otherwise contact with Ingeteam Technical Service. Technical Guide 11/04/2019... -
Page 8: Attachment I. References
INGECON SUN STORAGE 1Play 6 Attachment I. References Commercial codes for the products indicated: Installation and Operation Manual of ISS 1Play ABH2013 Ingecon Sun Manager Software Installation Manual of BYD HV Ingecon Sun Training https://www.ingeconsuntraining.info/?page_id=7049 Technical Guide 11/04/2019...