Available Optional Kits - Ingeteam INGECON SUN PowerMax TL B Series Installation And Operation Manual

Ingeteam

2.4. Available optional kits

These units can incorporate the following optional, by order, kits:
• DC fuses
• DC type I + II natural surge arrester
• Monitoring of DC input currents
• Ground connection of the PV array
• AC wattmeter
• Low temperature operating kit
• Reactive power regulation with no PV array power (night reactive)
• Auxiliary services
• PV array depolarizer
• Integrated DC combiner box
• Sand trap
• Bottom cover
• Ancillary services feeder
• Communications accessories
DC fuses
Depending on the inverter´s configuration, this may come with between six and fifteen fuses in the positive pole or
both poles.
DC type I + II natural surge arrester
The equipment has DC type II natural surge arresters. Optionally type I + II surge arresters can be equipped for
greater protection against natural surges.
Monitoring of DC input currents
The DC input currents monitoring kit is offered as an option. The aim of this kit is to monitor each of the
equipment´s input strings. This device implements the following functions:
• Detection of anomalous currents by string or by fault.
• Detection of blown PV input fuses.
• Data storage.
Monitoring of this item can be accessed through the unit's communications.
Ground connection of the PV array
This kit enables the grounding of the negative pole of the PV array, depending on the technology of the panels used
or the applicable standard. The ground connection of the PV array is done with a device that continuously monitors
the ground pole´s current.
The equipment monitors the device´s status and goes to stop if it detects a ground current greater than 10 mA/
kVAr.
AC wattmeter
The AC wattmeter kit consists fitting a wattmeter to the inverter in order to measure the voltage, current and power
levels at the output of the unit.
Monitoring of this item can be accessed through the unit's communications.
The main parameters that can be monitored by this kit are:
• Voltage: mean and maximum values.
• Active, reactive and total apparent power and by phase.
14 ABQ2026IQE01_A - Installation and Operation Manual
Unit description