Playing Back A Clip; Transport Buttons; Deleting Clips - AJA Ki Pro Ultra Installation & Operation Manual

Playing Back a Clip

Transport Buttons

FFWD >>:
REV <<:
User Control Knob:
JOG Mode:

Deleting Clips

Ki Pro Ultra v1.2r1
To playback recorded media, select a clip and press PLAY. If the clip you wish to playback
is not currently selected, use the User Control Knob to scroll until the clip name appears
on the bottom right of the display. Like recording, there is more than one way to initiate
playback (front panel or web browser). From the front panel these are the basic steps:
1. Press the STOP button to get to the TRANSPORT mode (if not already there). Find the
clip name in the display (it shows the current Slot, Reel, and Clip name).
2. Turn the User Control Knob until you find the clip you are looking for.
3. Press the PLAY (>) button.
4. When playing back a clip (PLAY, FFWD, or REV) the first push of STOP acts as a "Pause"
mode: the playback is paused, the current point of the clip is displayed, and the STOP
button will flash. A second push of STOP will completely stop the playback and Ki Pro
Ultra's outputs will go into an "E to E" mode (the currently selected inputs will be
bypassed to the outputs). When a playback reaches the end of a clip, it will
automatically pause on the last frame of the clip.
During playback you can use the FFWD, REV, SELECT, or User Control Knob as follows:
Press button to begin fast playback of the current clip at 2x speed. Successive pushes
increase the speed to 4x, 8x, and 16x. (Pushing the button after 16x speed is reached has
no further effect.) When fast-forwarding, audio is muted.
Pressing REV when not highlighted, begins playback of the current clip in reverse at 1x
speed. Successive pushes increase the speed to 2x, 4x, 8x, and 16x. (Pushing the button
after 16x speed is reached has no further effect.) When playing in reverse, audio is muted
for all speeds.
While in TRANSPORT mode, the User Control Knob will scroll through the clips in the
active media. When a clip is selected it is "cued" to the beginning of the clip. Note that
ordering and playback of clips is based on timestamp order, not clip name.
While in TRANSPORT mode, and in either a "STOP" or "pause" state, the User Control
Knob will "single step" the current clip one frame per scroll-click.
To delete a previously recorded clip:
1. In TRANSPORT mode, use the User Control Knob to browse through the clips on the
current media. When a clip is on another media you will press SLOT until it's selected.
2. When you find a clip you want to delete, press the Media button, scroll to 16.25 to
delete the current clip and press the knob.
3. Ki Pro Ultra asks, "CONFIRM ACTION. " Choose OK and press the User Control Knob to
confirm deletion. Pressing any other button, will abort the deletion.
NOTE: When deleting large clips, Ki Pro Ultra will display a progress status window on the front panel
and the WEB UI. Large clips can take up to 30 seconds to delete. To remove all clips on a drive,
it is faster to format the drive.
35
www.aja.com