4 Control Units
4.2 "SIMODRIVE 611 universal HRS" control board
Control board for
1 axis
4-94
The following 1–axis control boards are available:
These interfaces have
no function for the
1–axis version
Mounting slot for
S
Optional TERMINAL module
or
S
Optional PROFIBUS DP module
S
Interfaces
S
Terminals
S
Switches
Memory module
S
Firmware
S
User data
Display and operator unit
Pulse interface
Equipment bus
The following applies to retaining screws:
Tighten (to establish a good shield contact)
max. torque = 0.8 Nm
For plug connections:
Plug connectors with the same number of pins must be
appropriately coded so that they cannot be interchanged (refer to
the index entry "Coding the mini connectors").
Fig. 4-5
Control board for 1 axis (SIMODRIVE 611 universal HRS)
SIMODRIVE 611 Configuration Manual (PJU) – 02/2012 Edition
1–axis for resolvers
© Siemens AG 2012 All Rights Reserved
11.05
05.01
X302