Siemens 6SN1123-1AA00-0DA2 Configuration Manual page 235

7 Line Supply Connection
7.4 Line filters for I/R and UI modules
7.4.3 Line Filter
Description
Table 7-15 Assigning wideband line filters to the UI modules
Filter components
Rated AC current
Order number
Supply voltage
Mounting position
Dimensions (W x H x D),
approx.
Module width
Weight, filter
Power loss
Connection
Terminals
Line supply connection
(line)
Terminals
Load connection (load)
2)
I fuse
rated
Permissible
ambient temperature
S
Operation [°C]
S
Storage/transport [°C]
Cooler
Degree of protection to EN
60529 (IEC 60529)
DIN EN 61800-3 (IEC
61800-3)/VDE 0160-103 ra-
dio interference suppres-
sion
1) The permissible supply voltage of the system depends on the infeed module used.
2) The fuse used must have this rated current. Recommendations for the fuses, refer to Table 7-6.
3) Last position of the Order No. w1
7-234
The line filters for UI modules attenuate frequencies in the range from 150 kHz
up to 30 MHz. In conjunction with the consequential implementation of the sys-
tem configuration according to the Configuration Manual and the EMC installa-
tion guideline for SIMODRIVE, SINUMERIK, SINAMICS S 120, when applying
the installation guideline, the limit values at the installation location can be at-
tained according to the EC directive EMC. The precondition is that the user
takes into account the specific EMC guidelines at the installation location that
may possibly apply and makes a final check. From the line filter, total cable
lengths up to 500 m are possible!
UI module
5/10 kW
Line filter, 5 kW
16 A
3)
6SN1111–0AA01–1BAV
3–ph. 380 V – 10% ... 3–ph. 480 V AC + 10% (TN line supply)
Arbitrary (only for UI modules)
156 x 193 x 81
Refer to dimension drawings, Chapter 12
3.8 kg
20 W
2
4 mm /1.5 Nm
PE, M6 studs/3 Nm
L1, L2, L3, PE
U, V, W
16 A
0 ... +40; maximum +55 at 0.6 • P
–25 ... +70
Natural ventilation
IP20
Limit value Class C 2.
SIMODRIVE 611 Configuration Manual (PJU) – 02/2012 Edition
UI module
10/25 kW
Line filter, 10 kW
25 A
3)
6SN1111–0AA01–1AAV
156 x 281 x 91
5.7 kg
20 W
2
10 mm /1.5 Nm
PE, M6 studs/3 Nm
L1, L2, L3, PE
U, V, W
25 A
of the UI module
rated
© Siemens AG 2012 All Rights Reserved
02.12
05.01
UI module
28/50 kW
Line filter, 36 kW
65 A
3)
6SN1111–0AA01–1CAV
; 50...60 Hz $10%
1)
171 x 261 x 141
12.5 kg
25 W
2
50 mm /6 Nm
PE, M10 studs
L1, L2, L3, PE
U, V, W
80 A