Motor Encoder - Siemens 6SN1123-1AA00-0DA2 Configuration Manual

3 Motor Selection, Position/Speed Sensing

3.2 Motor encoder

3.2 Motor encoder
General
Recommended
encoder signals
for fault–free
operation with
sin/cos 1 Vpp
3-64
The motors are equipped with various encoder systems to sense the rotor posi-
tion and speed.
Reference: refer to Appendix B in the relevant Configuration Manual
of the motors
The assignment of the SIMODRIVE units to the servo/main spindle motor types
and encoder systems is shown in the Table 3-5.
Depending on the requirements, various types of encoder are used and pro-
cessed in the appropriate modules:
S
sin/cos 1 Vpp or EnDat encoder
S
SSI encoder (only SIMODRIVE 611 High Performance, High Standard, HLA/
ANA)
S
Resolver (only SIMODRIVE 611 universal)
S
TTL encoder (only SIMODRIVE 611 universal with induction motors)
Induction motors can also be operated without encoders.
The modules provide high encoder resolutions with internal pulse multiplication.
The following encoder signals are recommended for fault–free operation:
S
For track signals A+, A–, B+, B–, C+, C–, D+ and D–
Signal
5 V
2.0...
3.0 V
0 V
Fig. 3-1 Signal characteristics for track signals A+, A–, B+, B–, C+, C–, D+ and D–
SIMODRIVE 611 Configuration Manual (PJU) – 02/2012 Edition
0.375...0.6 V
© Siemens AG 2012 All Rights Reserved
02.12 05.08
05.01
t