Cable Cross-Sections That Can Be Connected - Siemens 6SN1123-1AA00-0DA2 Configuration Manual

6 Infeed Modules
6.2 Interface overview
6.2.3 Cable cross–sections that can be connected
Table 6-3 Cable cross–sections that can be connected at the infeed module (line supply connection)
MLFB
6SN1143–1BB00–0F AV
6SN1143–1BB00–0EAV
6SN1145–1BA01–0DAV
6SN1145–1BB00–0DAV
6SN1145–1BA02–0CAV
6SN1145–1BA01–0BAV
j j
6SN114 –1A 01–0BAV
6SN1145–1AA01–0AAV
6SN1146–1AB00–0BAV
Key
1) Size of the screw for the protective conductor connection
2) Tightening torque of the terminals or connectors
6-152
The cable cross–sections that can be connected are listed in Table 6-3:
Connection cross–section [mm
1,5 2,5 4 6
120 kW
80 kW
55 kW
55 kW
36 kW
16 kW
28 kW
10 kW
5 kW X X X X
Terminal area for flexible cable with end sleeves (with or without plastic collars)
Terminal area for flexible cables with terminal pin
IP20 is guaranteed when correctly used, e.g. insulated pin–type cable lugs
X
2
10 16 25 35 50 70 95 120 150
X
X
X
X
© Siemens AG 2012 All Rights Reserved
SIMODRIVE 611 Configuration Manual (PJU) – 02/2012 Edition
02.12
05.01
] 1) 2)
[Nm]
X M6 25...30
X M6 15...20
X M6 15...20
X M6 15...20
M6 6...8
M5 1,5...1,8
M6 6...8
M5 1,5...1,8
M5 0,7...0,8