Siemens 6SN1123-1AA00-0DA2 Configuration Manual page 478

02.12
05.01
EMC limit values in
South Korea
The EMC limit values to be maintained for Korea correspond to the limit values
of the EMC product standard for variable–speed electric drives EN 61800–3,
Category C2all or limit value class A, Group 1 according to EN55011.
With suitable supplementary measures, the limit values according to Category
C2 or to limit value class A, Group 1 are maintained.
In addition, other measures, for example the use of an additional radio interfer-
ence suppression filter (EMC filter) may be required. Further, measures for
EMC–compliant installation of the system are described in detail in this manual
or in the Configuration Manual EMC Installation Guideline.
It should be noted that the label attached to the device is always decisive re-
garding statements made about the standards that are complied with.
© Siemens AG 2012 All Rights Reserved
SIMODRIVE 611 Configuration Manual (PJU) – 02/2012 Edition
C Certificates/Declarations of Conformity
J
C
C-477