Internal Cooling - Siemens 6SN1123-1AA00-0DA2 Configuration Manual

10.04
05.01
2.7.2

Internal cooling

Fig. 2-8 Power module with inserted control unit, internal cooling
Note
The power loss is dissipated in the cabinet and must therefore be taken into
account when engineering/dimensioning the cabinet cooling.
© Siemens AG 2012 All Rights Reserved
SIMODRIVE 611 Configuration Manual (PJU) – 02/2012 Edition
2 System Configuration
2.7 Infeed modules
Cooling clearance
min. 100 mm clearance
Do not cover e.g., with cable,
to ensure the appropriate cooling
Cooling clearance
min. 100 mm
clearance
2
2-59