Installation Of The Rear Cover; Installation Of The Light Source Cover - Barco DP2K SLP Series Service Manual

Image 22-14

22.11 Installation of the rear cover

Required tools
Flat screwdriver 7 mm
How to install the rear cover?
1. Install the rear cover on the projector.
2. Fasten the four captive screws (reference 1 Image 22-15) of the rear cover using a 7 mm flat screwdriver.
Image 22-15

22.12 Installation of the Light Source cover

Required tools
Flat screwdriver 7 mm
How to install the Light Source cover?
1. Install the Light Source cover on the projector.
1
Removal and installation of the projector covers
R5906848 /04
1
DP2K SLP Series 281