Mounting The Support Rods - Barco ELM Series Installation Manual

Mounting the Support Rods

What has to be Two support rods have to be mounted onto the rigging points.
done
Necessary Tools A spanner for M6 (No 8)
Mounting the To mount the support rods, follow the next procedure:
suport bars
Illustrations
Image 1
BARCO ——————————————————— 7
Step Action
1 Put a rod fixation block into the front rigging points, lining
up the holes with the holes in the rigging points.
2 Run the support rod through the holes in the rigging point
and the rod fixation block.
3 Secure the position (see further) of the rods by tightening
the 2 screws (A) on the fixation blocks.
Attention: To allow later on the adjustment of the distance
between polarization filter and front lens, don’t tighten the
screws too hard.
Image 3
Image 2
————————————— Projection Systems
Image
1&2&3
1&2&3
A A