KidKraft ASHBERRY Installation And Operating Instructions Manual page 43

Step 14: Attach Ground Stakes
MOVE FORT TO FINAL LOCATION. FINAL LOCATION MUST BE LEVEL GROUND.
be driven 10-1/2" into ground. Digging or driving stakes can be dangerous
if you do not check first for underground wiring, cables or gas lines.
A: Drive 1 (0318) Ground Stake 10-1/2" into the ground on (2157) Ground SW Side at (0369) Lower Diagonal
and 1 on the Slide Wall Side tight to (2153) Post on the Back Wall as shown in fig. 14.1. Attach using 2 (S3)
#8 x 2-1/2" Wood Screws per ground stake. (fig. 14.2)
Fig. 14.2
S3
10-1/2" Into Ground
Wood Parts
2 x Ground Stake 1-1/4 x 1-1/2 x 14"
0318
WARNING:
To prevent tipping and avoid potential injury, stakes must
0318
4 x
Back Wall
2153
Swing Side
Hardware
#8 x 2-1/2" Wood Screw
S3
43
Slide Wall
Fig. 14.1
Front Wall
0369
2157