KidKraft ASHBERRY Installation And Operating Instructions Manual page 49

Step 17: Upper Back Wall Assembly
A: Tight to the top of (2123) Back Floor and flush to the outside edge of (2112) SL Post attach (2151) Back Wall
Support to (2112) SL Post and (2153) Post with 4 (S7) #12 x 2" Pan Screws. (fig. 17.1 and 17.2)
B: Flush to the outside edge of (2151) Back Wall Support and tight to the floor boards attach (1205) CE Access
Wall to (2151) Back Wall Support, (2143) Middle Back and (2145) Back Top with 5 (S1) #8 x 1-1/8" Wood Screws,
as shown in fig 17.2 and 17.4.
C: Evenly space and attach 4 (5265) Cedar Walls to (2151) Back Wall Support and (2143) Middle Back with 4
(S1) #8 x 1-1/8" Wood Screws, as shown in fig 17.1, 17.2, 17.3 and 17.4. Make sure the bottom of the boards
are tight against the floor boards and the bevelled ends are at the top and facing out.
Fig. 17.2
2112
Flush
Fig. 17.3
Wood Parts
4 x Cedar Wall 1 x 4 x 28"
5265
1 x CE Access Wall 1 x 4 x 41-3/4"
1205
1 x Back Wall Support 5/4 x 4 x 31"
2151
2153
Outside View
S7
x 4
Back Wall
Inside
View
Flush
2151
2123
2145
1205
S1
x 5
S1
x 4 per
board
5265
Hardware
21 x #8 x 1-1/8" Wood Screw
S1
4 x #12 x 2" Pan Screw
S7
49
Fig. 17.1
Outside View
Back Wall
Fig. 17.4
Inside View
2153
2143
2112
2151