KidKraft ASHBERRY Installation And Operating Instructions Manual page 42

Step 13: Floor Assembly
Part 2
D: Place 1 (2147) End Board at Swing Wall side tight to (2126) SW Floor and (2134) Cedar Gap Board on Slide
Wall side tight to (2122) SL Floor End.
E: Starting on the Swing Wall side place 3 (2158) Cedar Floor Boards followed by 1 (2104) Middle Gap Board
so the gap in the board fits around the (2154) Front Post, then the (2136) CE Gap Board, another (2104) Middle
Gap Board, 3 more (2158) Cedar Floor Boards, 1 (2147) End Board and then the last 2 (2158) Cedar Floor
Boards . Make sure all boards are evenly spaced. (fig. 13.2)
F: Attach all boards to both (2120) Floor Front Backs and (2142) Floor Joist with 5 (S2) #8 x 1-1/2" Wood
Screws per board. (fig. 13.2)
Fig. 13.2
S2
2158
Wood Parts
1 x CE Gap Board 1 x 4 x 38-3/4"
2136
2 x End Board 1 x 6 x 38-3/4"
2147
8 x Cedar Floor Board 1 x 5 x 38-3/4"
2158
1 x Cedar Gap Board 1 x 5 x 38-3/4"
2134
2 x Middle Gap Board 1 x 5 x 38-3/4"
2104
Swing Wall
2153
x 5 per
board
2126
2120
(hidden)
2104
2154
Front Wall
Back Wall
2147
2123
2158
2122
2124
Hardware
70 x #8 x 1-1/2" Wood Screw
S2
42
2136
2147
2120
(hidden)
2158
2134
2142
(hidden)
Slide Wall