KidKraft ASHBERRY Installation And Operating Instructions Manual page 28

Step 6: Door Assembly
Part 2
F: On the outside face of the Door Assembly place Small Window in the window gap and attach with 8 (S13) #6 x
5/8" Pan Screws. (fig. 6.3)
G: On the outside of the Door Assembly place 1 Door Handle centred over the top (2052) Door Cross, as shown
in fig. 6.3, then attach with 2 (S13) #6 x 5/8" Pan Screws.
H: On the opposite side from the Door Handle, on the outside, place 1 Door Hinge flush to the top of the lower
(2052) Door Cross and 1 Door Hinge centred on (2053) Door Arch, as shown in fig. 6.3, then attach with 3 (S13)
#6 x 5/8" Pan Screws per hinge.
Note: Hinge stops must be tight to the Door Assembly.
I: On the inside of Door Assembly, measure 12-5/16" up from the bottom of (2057) Door Side Right and attach
Catch Plate using 2 (S18) #6 x 1" Wood Screws. (fig.6.4)
J: Place a second Door Handle on the inside of the Door Assembly at approximately the same spot as the first
then attach with 2 (S13) #6 x 5/8" Pan Screws. (fig. 6.4)
Fig. 6.3
Door Hinge
2052
S13
x 3 per
hinge
Outside View
2053
Small Window
S13 x 8
S13
2057
2052
Hardware
18 x #6 x 5/8" Pan Screw
S13
2 x #6 x 1" Wood Screw
S18
28
Fig. 6.4
Door Handle
S18
2057
Inside View
S13
Catch Plate
12-5/16"
Other Parts
2 x Door Handle
2 x Door Hinge
1 x Small Window
1 x Catch Plate