KidKraft ASHBERRY Installation And Operating Instructions Manual page 34

Step 9: Front Wall Assembly
Part 3
D: With a helper loosely attach (2124) Front Floor on the outside of the assembly and (2120) Floor Front Back
on the inside of the assemby to both (2153) Posts and both (2154) Front Posts with 1 (H15) 1/4 x 3-3/4" Hex Bolt
(with lock washer, flat washer and t-nut) per post.
E: Make sure assembly is square and the distance between (2153) Post and (2154) Front Post with (2135) Wall
Support is maintained at 16-5/8 then tighten all bolts and attach (2124) Front Floor to each (2153) Post with 2
(S15) #8 x 1-3/4" Wood Screws. (fig. 9.3)
Wood Parts
1 x Front Floor 5/4 x 5 x 67"
2124
1 x Floor Front Back 2 x 3 x 64-1/4"
2120
Fig. 9.3
2153
S15
S15
H15
H15
Outside View
(fig. 9.3)
2154
Hardware
4 x 1/4 x 3-3/4" Hex Bolt
H15
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
2 x #8 x 1-3/4" Wood Screw
S3
34
2153
1/4" t-nut
2120
2124
1/4" flat
washer
1/4" lock
washer