KidKraft ASHBERRY Installation And Operating Instructions Manual page 55

Step 20: Lower Slide Wall Assembly
Part 2
C: Tight to the bottom of (2129) Cafe Support and flush to outside edges of both (2153) Posts attach (2155)
Siding Narrow to each post with 2 (S0) #8 x 7/8" Truss Screws as shown in fig. 20.4 and 20.6.
D: Tight to bottom of (2155) Siding Narrow and flush to the outside edges of both (2153) Posts attach 4
(2116) Siding to each post with 2 (S0) #8 x 7/8" Truss Screws per board, as shown in fig. 20.4 and 20.6.
Make sure there are no gaps between boards. The bottom (2116) Siding will be tight to the top of (2127) Side
Ground.
E: From inside the assembly place (2135) Wall Support over the centre pilot holes of the (2116) Siding and
(2155) Siding Narrow and tight to the top of Cafe Assembly then attach from outside of the assembly with 1
(S0) #8 x 7/8" Truss Screw per siding and 2 (S15) #8 x 1-3/4" Wood Screws in (2127) Side Ground. (fig. 20.5
and 20.6)
Fig. 20.5
Slide Wall
Cafe Assembly
Inside View
Fig. 20.6
Wood Parts
1 x Siding Narrow 3/8 x 3 x 38-3/4"
2155
4 x Siding 3/8 x 3-1/2 x 38-3/4"
2116
1 x Wall Support 2 x 2 x 22-1/4"
2135
2135
Cafe Assembly
2153
2129
S0
x 3 per board
2127
15 x
2 x
Slide Wall
Outside View
S15
Hardware
#8 x 7/8" Truss Screw
S0
#8 x 1-3/4" Wood Screw
S15
55
Fig. 20.4
2153
2155
2116