KidKraft ASHBERRY Installation And Operating Instructions Manual page 33

Step 9: Front Wall Assembly
Part 2
B: Loosely attach 2 (2153) Posts and 2 (2154) Front Posts to (2150) Front Back Ground with 6 (H2) 1/4 x 2" Hex
Bolts (with lock washer, flat washer and t-nut), as shown in fig. 9.2. Notice where (2154) Front Post from Step 9,
Part 1 is attached that (2135) Wall Support faces the other (2154) Front Post.
C: Loosely attach (2114) Top Front to each post, with 1 (H2) 1/4 x 2" Hex Bolt (with lock washer, flat washer and
t-nut) per post. The distance between (2153) Post and (2154) Front Post with (2135) Wall Support must be 16-
5/8". (fig. 9.2)
Wood Parts
2 x Post 2 x 4 x 96-1/2"
2153
1 x Top Front 1 x 4 x 52"
2114
2 x Front Post 2 x 2 x 94"
2154
1 x Front Back Ground 1 x 5 x 67"
2150
Fig. 9.2
H2
16-5/8"
2153
2135
H2
10 x
2114
2154
2150
1/4" t-nut
1/4" lock
washer
1/4" flat
washer
Hardware
1/4 x 2" Hex Bolt
H2
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
33
Notice bevelled
edge facing up
Notice position of
(2135) Wall Support