KidKraft ASHBERRY Installation And Operating Instructions Manual page 40

Step 12: Slide Wall Assembly
A: Loosely attach (2127) Side Ground to the outside of each (2153) Post on the Slide Wall side with 4 (H4) 1/4 x
4" Hex Bolts (with lock washer, flat washer and t-nut). (fig. 12.1)
B: Attach (2122) SL Floor End flush to the bottom of each (2112) SL Post with 8 (S3) #8 x 2-1/2" Wood Screws.
(fig. 12.1)
C: Tight to the bottom of (2123) Back Floor and (2124) Front Floor and flush to the outside edges of (2153)
Posts attach (2103) Lower Floor Support with 4 (S7) #12 x 2" Pan Screws. (fig. 12.1)
D: Attach 1 (2144) Lower Bench flush to the tops of each (2112) SL Post with 4 (S2) #8 x 1-1/2" Wood Screws.
(fig. 12.1)
Fig. 12.1
flush
2124
2127
Wood Parts
1 x Lower Bench 1 x 4 x 38-7/8"
2144
1 x SL Floor End 2 x 4 x 38-7/8"
2122
1 x Lower Floor Support 5/4 x 4 x 38-7/8"
2103
1 x Side Ground 1 x 5 x 38-3/4"
2127
2144
S7
x 4
Front
4 x 1/4 x 4" Hex Bolt
H4
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
4 x #8 x 1-1/2" Wood Screw
S2
4 x #12 x 2" Pan Screw
S7
Back
2123
2122
2103
1/4"
t-nut
H4
Slide Wall
Hardware
40
x 4
S2
2112
x 4 per side
S3
2153
1/4" flat
washer
1/4" lock
washer
8 x #8 x 2-1/2" Wood Screw
S3