KidKraft ASHBERRY Installation And Operating Instructions Manual page 41

Step 13: Floor Assembly
Part 1
A: Loosen the top bolt and remove the bottom bolt in (2130) SW Mount. Do not discard these bolts, you will
re-install them after (2142) Floor Joist is attached.
B: Flush to the bottom of both (2126) SW Floor and (2122) SL Floor End attach (2142) Floor Joist with 2 (S4)
#8 x 3" Wood Screws per end (fig. 13.1)
C: Re-install the bolt in (2130) SW Mount and tighten both bolts. (fig. 13.1)
Wood Parts
1 x Floor Joist 2 x 3 x 65-5/8"
2142
Fig. 13.1
Slide Wall
2122
2142
2126
4 x
2106
Swing Wall
Hardware
#8 x 3" Wood Screw
S4
41
2130
x 4
S4