KidKraft ASHBERRY Installation And Operating Instructions Manual page 37

Step 10: Back Wall Assembly
Part 2
D: Attach (2143) Middle Back, on the outside of the assembly to both (2153) Posts with 2 (H2) 1/4 x 2" Hex Bolts
(with lock washer, flat washer and t-nut).
E: Make sure the assembly is square then tighten all bolts and attach (2143) Middle Back to each (2153) Post
with 2 (S15) #8 x 1-3/4" Wood Screws. (fig. 10.3)
F: At the ends of (2143) Middle Back and (2120) Floor Front Back place (2112) SL Post, as shown in fig. 10.3.
Attach (2112) SL Post to (2123) Back Floor with 1 (H5) 1/4 x 4-1/2" Hex Bolt (with lock washer, flat washer and
t-nut) and to (2143) Middle Back with 1 (H4) 1/4 x 4" Hex Bolt (with lock washer, flat washer and t-nut) in the top
hole and 1 (S7) #12 x 2" Pan Screw (with flat washer) in the bottom hole. (fig. 10.3)
G: Attach (2112) SL Post to (2120) Floor Front Back with 2 (S4) #8 x 3" Wood Screws. (fig. 10.3)
Wood Parts
1 x Middle Back 1 x 5 x 65-5/8"
2143
1 x SL Post 2 x 4 x 32-1/2"
2112
(fig. 10.3)
Fig. 10.3
2143
2112
S7
with 3/16"
flat washer
1/4"
t-nut
S4
1/4" flat
washer
1/4" lock
washer
H5
2 x 1/4 x 2" Hex Bolt
H2
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
H4
1 x 1/4 x 4" Hex Bolt
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
H5
1 x 1/4 x 4-1/2" Hex Bolt
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
1/4"
t-nut
H2
2120
H4
2123
2153
Outside View
Hardware
37
1/4" flat
washer
1/4" lock
washer
H2
S15
2 x #8 x 1-3/4" Wood Screw
S15
1 x #12 x 2" Pan Screw (3/16" flat washer)
S7
2 x #8 x 3" Wood Screw
S4