KidKraft ASHBERRY Installation And Operating Instructions Manual page 31

Step 8: Roof Assembly
Part 2
D: Starting at the top of the Roof Support Assembly attach 1 (2156) Roofing on each side of the Roof Support
Assemblies with 3 (S0) #8 x 7/8" Truss Screws per board. (fig. 8.2) Be sure to overlap the top of the boards so
there are no gaps. (fig. 8.2 and 8.3)
E: Drill a hole 1-1/2" up from the bottom of the 2 bottom (2156) Roofing (for bottom row only). Attach 1 (2156)
Roofing at the bottom of the Roof Support Assembly on each side, making sure they are flush to each (2146) Roof
Support Right and (2132) Roof Support Left with 3 (S0) #8 x 7/8" Truss Screws per board. (fig. 8.2 and 8.4)
F: On one side of the assembly evenly space and attach 8 (2156) Roofing, leaving no gaps, with 3 (S0) #8 x 7/8"
Truss Screws per board. There should be 10 (2156) Siding on this side. (fig. 8.2)
G: On the other side of the assembly evenly space and attach 8 (2156) Roofing, leaving no gaps, with 3 (S0) #8 x
7/8" Truss Screws per board. (fig. 8.2)
Fig. 8.3
S0
Overlap cedar roofing
Wood Parts
20 x Roofing 3/8 x 3-1/2 x 53-13/16"
2156
Fig. 8.2
S0 x 60
2132
Roof Supports
removed for clarity
2156
60 x
2146
Hardware
#8 x 7/8" Truss Screw
S0
31
x 20
2156
2161
(hidden)
Fig. 8.4
1-1/2"
1-1/2"
Flush to edge