KidKraft ASHBERRY Installation And Operating Instructions Manual page 21

Step 2: Access Ladder / Rockwall Assembly
Part 2
D: Turn the Access Ladder Assembly over then place (2117) Rock Rail on the ground next to (2101) Access Rail
Left so it matches the orientation of the other two rails as shown in fig. 2.2.
E: Flush to the outside edges of (2100) Access Rail Right and (2117) Rock Rail and to the angled edges of all
three rails attach (2111) Ladder Top to top of Access Ladder assembly and (2117) Rock Rail using 3 (S15) #8 x
1-3/4" Wood Screws. Notice that the holes in the board are towards the bottom. (fig. 2.2 and 2.3)
Fig. 2.2
Wood Parts
1 x Ladder Top 5/4 x 3 x 35-1/4"
2111
1 x Rock Rail 2 x 3 x 56-1/8"
2117
2117
2100
Notice hole location
3 x
S15
2101
Fig. 2.3
2100
Hardware
#8 x 1-3/4" Wood Screw
21
Rock Rail flush to
end of Ladder Top.
2111
2111
Ladder Top flush to
this edge and to end
S15
S15