KidKraft ASHBERRY Installation And Operating Instructions Manual page 47

Step 16: Upper Front Wall Assembly
Part 3
F: Place 2 (2152) Roof Supports on the (2128) Siding so the ends are tight against the inside edges of (2118)
Front Trim and to the top of (2124) Front Floor, as shown in fig. 16.4 and 16.5. The top of the (2152) Roof Sup-
ports should form a peak and sit tight together. Attach to (2153) Posts and (2154) Front Posts with 2 (S7) #12 x 2"
Pan Screws in each support. (fig. 16.4, 16.5 and 16.6)
G: Place (2108) Left Roof Board and (2109) Right Roof Board on top of (2152) Roof Supports so they meet tight
in the centre and form a peak. Attach to each (2152) Roof Support with 3 (S2) #8 x 1-1/2" Wood Screws per
board, as shown in fig. 16.4, 16.5 and 16.6.
Fig. 16.5
S2
x 6
2118
Tight
2152
Wood Parts
1 x Right Roof Board 1 x 4 x 30"
2109
1 x Left Roof Board 1 x 4 x 30"
2108
2 x Roof Support 2 x 2 x 29-1/4"
2152
Fig. 16.6
2108
2128
2124
x 4
S7
2153
6 x
S2
4 x
S7
Hardware
#8 x 1-1/2" Wood Screw
#12 x 2" Pan Screw
47
Roof boards flush in centre.
Roof supports flush in centre.
Fig. 16.4
2109
2152
2154
Front Wall
2118
2128
2124