KidKraft ASHBERRY Installation And Operating Instructions Manual page 63

Step 26: Attach Windows and Clock to Fort
A: On the Front Wall side of the assembly place 2 Arch Top Windows in the outside window gaps between (2145)
Back Top and (2125) Middle Front and attach to (1740) Window Braces, (2119) Oval Windows, (2145) Back Top
and (0389) Window Frame with 6 (S13) #6 x 5/8" Pan Screws per window. (fig. 26.1 and 26.2)
B: Place Oval Window in centre window gap and attach to both (2119) Oval Windows, (2145) Back Top and
(0389) Window Frame with 4 (S13) #6 x 5/8" Pan Screws. (fig. 26.2)
C: Place Clock Face between (2124) Front Floor and roof support detail snug to the siding. The hole in the clock
should line up to the hole in (2162) Siding - Clock. Attach with 4 (S10) #8 x 1" Pan Screws. (fig. 26.1 and 26.3)
D: From inside the assembly insert Clock Knob in the hole in (2162) Siding - Clock, then with 1 person inside the
fort and 1 outside place Hour Hand over Clock Knob making sure they are lined up properly. Finally, press Minute
Hand over Hour Hand. (fig. 26.3, 26.4, 26.5 and 26.6)
Fig. 26.2
2145
1740
2125
Arch Top
Window
Fig. 26.1
2124
Hole in clock
siding lines up to
hole in clock.
Arch Top Window
2119
S13
x 4
S13
0389
x 6
Oval Window
2162
Front Wall
1740
2153
S13
x 6
Fig. 26.5
Hour Hand
Minute Hand
Knob
Hardware
16 x #6 x 5/8" Pan Screw
S13
4 x #8 x 1" Pan Screw
S10
63
Hour Hand
Clock
Minute Hand
Fig. 26.4
Inside View
Clock
2 x Arch Top Window
1 x Oval Window
1 x Clock Assembly
Fig. 26.3
S10
x 4
2124
2162
Knob connects to
minute/hour hands.
Other Parts