KidKraft ASHBERRY Installation And Operating Instructions Manual page 35

Step 9: Front Wall Assembly
Part 4
F: Loosely attach (2125) Middle Front on the outside of the assembly to both (2153) Posts and both (2154) Front
Posts with 4 (H2) 1/4 x 2" Hex Bolts (with lock washer, flat washer and t-nut).
G: Make sure the distance between (2114) Top Front and (2125) Middle Front is 9-1/2" then attach (2125)
Middle Front to each (2153) Post with 2 (S15) #8 x 1-3/4" Wood Screws. Tighten the bolts from Step F. (fig. 9.4
and 9.5)
H: At the ends of (2125) Middle Front and (2120) Floor Front Back place (2112) SL Post as shown in fig. 9.4.
Attach (2112) SL Post to (2124) Front Floor with 1 (H5) 1/4 x 4-1/2" Hex Bolt (with lock washer, flat washer and
t-nut) in the bottom hole and 1 (S7) #12 x 2" Pan Screw (with flat washer) in the top hole and to (2125) Middle
Front with 1 (H4) 1/4 x 4" Hex Bolt (with lock washer, flat washer and t-nut) in the top hole and 1 (S7) #12 x 2"
Pan Screw (with flat washer) in the bottom hole. (fig. 9.4)
I: Attach (2112) SL Post to (2120) Floor Front Back with 2 (S4) #8 x 3" Wood Screws. (fig. 9.4)
Fig. 9.5
9-1/2"
1/4" flat
washer
1/4" lock
washer
H2
S15
Wood Parts
1 x Middle Front 1 x 5 x 65-5/8"
2125
1 x SL Post 2 x 4 x 32-1/2"
2112
2153
2114
1/4" t-nut
2125
4 x 1/4 x 2" Hex Bolt
H2
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
H4
1 x 1/4 x 4" Hex Bolt
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
H5
1 x 1/4 x 4-1/2" Hex Bolt
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
2153
Fig. 9.4
1/4" flat
washer
1/4" lock
washer
H2
H2
2154
H4
S7
with 3/16"
flat washer
Outside View
Hardware
35
(fig. 9.4)
2114
1/4" t-nut
S15
2125
2124
2153
H5
2 x #8 x 1-3/4" Wood Screw
S15
2 x #12 x 2" Pan Screw
S7
(with 3/16" flat washer)
2 x #8 x 3" Wood Screw
S4
2120
2112
S4