Toshiba TS3000 Series Instruction Manual page 289

series Robot Controller
Menu
[ENC]
[PLC–M]
[MEMOR]
[ZEROP]
[VER]
[CONV]
[ETHER]
[PAYLD]
[FCTRY]
[BCKUP]
(3) Caution
This function can be used in the teaching, internal automatic and external
automatic modes.
Used to display the servo encoder data.
Note: This function is intended for the maintenance.
Operate this key according to the instructions of our
service engineers.
Used to display the PLC data.
Used to display the system internal memory.
Note: This function is intended for the maintenance.
Operate this key according to the instructions of our
service engineers.
Used to set the origin (or home point).
Note: This function is intended for the maintenance.
Operate this key according to the instructions of our
service engineers.
Used to display the system version.
Used to display each status of the conveyor synchronization
function.
Note: For details, see the Conveyor Synchronous Function
Instruction Manual provided separately.
Used to display the Ethernet status.
Note: For details, see the Ethernet Interface Instruction
Manual provided separately.
Used to display PAYLOAD set values for manual operation
and set a PAYLOAD value as necessary.
Note: This is a function for initialization at shipment. Users
must not use.
Used to display backup operation to the flash memory.
– 10-3 –
OPERATOR'S MANUAL
Descriptions
STE 80730