Toshiba TS3000 Series Instruction Manual page 145

series Robot Controller
Keys operative in this mode and their operations are shown below.
Key
Used to move the cursor left on the command line.
←
Used to move the cursor right on the command line.
→
Used to input characters on the command line.
Numeral
Alphabet
Used to search the specified coordinate name and return the
EXE
system to the coordinate data directory display.
Unless the specified data is present, a message saying "Not
found" is displayed on the command line.
Used to select the insert or replace mode for the command
INS
line.
Used to delete one (1) character just before the cursor position
BS
on the command line.
Used to delete one (1) character at the cursor position on the
ALT + BS
command line.
This function works in a different manner according to the
ESC
presence or absence of input character(s).
Presence of input character(s): All input character(s) on the
Absence of input character(s): The system returns to the
(c) Step 3: Search.
Press the EXE key, and search for the specified coordinate name starts. If
found, the coordinate data directory is displayed with the specified data at the
head of the screen and the main cursor moved there. The display is as
shown below.
T R A N S S E L E C T I O N
T R A N S 0 0 0 0 8
T R A N S 0 0 0 0 9
T R A N S 0 0 0 1 0
T R A N S 0 0 0 0 8
< N O S A V F I N D
command line are cleared.
coordinate data directory display.
C U T
– 5-57 –
OPERATOR'S MANUAL
Descriptions
[ 9 /
1 0
1 0
P A S T E
1 1 ]
6
STE 80730