Power On Detection Commands - ATEN VS0801A User Manual

Power on Detection Commands

When Power on Detection is turned on, it does the following:
 Automatically switches to the next port with a powered on source device,
when the current active port device is powered off.
 When the VS0801A is turned on, the last port connected when the device
was turned off will be automatically selected.
The formula for the Power on Detection command is as follows:
1. POD Command + Control Command [Enter]
For example, to turn off Power on Detection, type the following:
pod off [Enter]
The following tables show the possible values for the Power on Detection,
and Control commands:
The following table shows the available command list:
Command Control
pod
pod
Note: Each command string can be separated with a space.
Command
pod Power on Detection command
Control
on Turn on
off Turn off (default)
Enter
on [Enter]
off [Enter]
Description
Description
Description
Enable Power on Detection
Disable Power on Detection (default)
Chapter 3. Operation
22