CS1953 User Manual
Restore Default Settings
To reset the CS1953 to its default Hotkey settings, do the following:
1. Invoke HSM (see page 20).
2. Press [R] [Enter].
All Hotkey settings return to the factory default settings.
Power on Detection
With Power on Detection, if the focus computer is powered off, the switch will
automatically switch to the next powered-on computer. Power on Detection
can be enabled or disabled. The default setting is enabled. To enable/disable
Power on Detection, do the following:
1. Invoke HSM (see page 20).
2. Press [E].
Alternative Manual Port Selection Settings
To toggle between the default and the alternative front panel pushbutton
manual port selection settings, do the following:
1. Invoke HSM (see page 20).
2. Press [S].
See Alternative Manual Port Selection Settings, page 16, for full details of the
alternative front panel pushbutton manual port selection settings.
Keyboard Emulation Control
To enable/disable keyboard emulation, do the following:
1. Invoke HSM (see page 20
2. Press [N].
Mouse Emulation Control
To enable/disable mouse emulation, do the following:
1. Invoke HSM (see page 20
2. Press [M].
24
).
).