Single Station Installation - ATEN kh2508a User Manual

KH2508 / KH2516
A A

Single Station Installation

In a single stage installation, there are no additional KVM switches daisy
chained down from the KH2508
installation, refer to the installation diagrams starting on page 15 (the numbers
in the diagram correspond with the numbers of the instruction steps), and do
the following:
1. Ground the KH2508
wire to the grounding terminal, and the other end of the wire to a suitable
grounded object.
Note: Do not omit this step. Proper grounding helps to prevent damage to
the unit from surges or static electricity.
2. Plug the the console keyboards, monitors, and mice into the unit's Console
1 and Console 2 console ports. The ports are color coded and marked with
icons for easy identification.
Note: You can use any combination of keyboard and mouse connections.
For example, you can use a PS/2 keyboard with a USB mouse.
3. Use Cat 5e/6 cable to connect any available KVM port to a KVM adapter
cable that is appropriate for the computer you are installing (see KVM
Adapter Cables, page 5 for details).
Note: To support a resolution of 1280x1024, the recommended maximum
distance between the KH2508
cable is 50 meters.
4. Connect the KVM adapter cable to the computer.
Plug the connectors on the KVM adapter cable into the appropriate ports
of the computer you are installing. (See KVM Adapter Cable Installation
Diagrams, page 16 for connection examples.)
5. Plug the female end of the power cord into the KH2508
power socket; plug the male end into an AC power source.
After the KH2508
A
it is powered up, you can turn on the servers.
14
User Manual
/ KH2516
A
/ KH2516
A A
/ KH2516 is cabled up, you can turn on the power. After
A
. To set up a single stage
A
by connecting one end of a grounding
/ KH2516 and the KVM adapter
A A
/ KH2516 's
A A