Changing The Normal / Secure Code; Changing The Normal / Bypass Code And Door Chime Settings - Rosslare AYC-Ex5 Instruction Manual

4) System returns to Normal
mode.
• You will hear three beeps.
Note:
•
•

Changing the Normal / Secure Code

1) Enter Programming mode.
2) Press "4" to enter Menu 4
• The Mode LED will flash
red.
3) Enter the new code you wish to set as
Normal / Secure Code
4) System returns to Normal
mode
• You will hear three beeps
Note:
•
•
•

Changing the Normal / Bypass Code and Door Chime Settings

AYC-Ex5 family manual
Programming Code cannot be erased, i.e. the code 0000 is
not valid and will not erase the Programming Code.
The factory four digit programming code is 1234.
Code 0000 will erase the Normal / Secure Code.
This code is disabled in case the Auxiliary Input is set to
toggle between Normal and Secure access modes.
Default Normal/Secure code is 3838
Controller Functionality
Mode/Transmit
Green
Mode/Transmit
4
Mode/Transmit
Red
?
Mode/Transmit
Green
Mode/Transmit
Door/Program
Door/Program
Green
Door/Program
Green
? ? ?
Door/Program
Door/Program
Page 40
Green