Changing The Programming Code; Changing The Normal/Secure Code - Rosslare AYC-Q54B Installation And Programming Manual

Controller Operation
5.9.5

Changing the Programming Code

• The Programming code cannot be erased; the code 0000 is invalid
and does not erase the Programming code.
• The factory default 4-digit Programming code is 1234.
To change the Programming code:
1. Enter Programming mode.
2. Press 3 to enter Menu 3.
The left LED turns green.
3. Enter the new 4-digit Programming code.
You hear three beeps.
The system returns to Normal mode.
5.9.6

Changing the Normal/Secure Code

• Code 0000 erases the Normal/Secure code.
• This code is disabled if the Auxiliary Input is set to toggle between
Normal and Secure access modes.
• The default Normal/Secure code is 3838.
To change the Normal/ Secure code:
1. Enter Programming mode.
2. Press 4 to enter Menu 4.
The left LED flashes red.
3. Enter the new Normal/Secure code.
You hear three beeps.
The system returns to Normal mode.
AYC-Qx4 Family Installation and Programming Manual
Green
Green Green
Green
Green
Red Green
Green
41