Changing The Programming Code; Cha Ging The Facility Code - Rosslare AYC-Ex5 Instruction Manual

Reader Functionality

Changing the Programming Code

1) Enter Programming Mode.
2) Press "3" to enter Menu 3.
• The Transmit LED will turn
red.
3) Enter the new 4 digit code you wish
to set as the Programming Code
4) System returns to Transmit Mode
• You will hear three beeps
• The Program LED will turn off
• The Transmit LED will turn red
Note:
•
•
Changing the Facility Code
1) Enter Programming Mode.
2) Press "4" to enter Menu 4.
• The Transmit LED will turn red.
3) Enter the new 3-digit code
you wish to set as the Facility
Code
4) System returns to Transmit Mode
• You will hear three beeps
• The Program LED will turn off
• The Transmit LED will turn red
Note:
•
•
Page 27
Programming Code can not be erased, i.e. the code 0000 is
invalid and will not erase the Programming Code.
The factory default 4-digit Programming Code is 1234.
Facility Code can be in the range of 000 to 255.
The default Facility Code is 0.
Mode/Transmit
3
Mode/Transmit
Red
? ? ? ?
Mode/Transmit
Red
Mode/Transmit
4
Mode/Transmit
Red
? ? ?
Mode/Transmit
Red
AYC-Ex5 family manual
Door/Program
Green
Door/Program
Green
Door/Program
Door/Program
Green
Door/Program
Green
Door/Program