Changing The Normal/Secure Code; Changing The Normal/Bypass Code - Rosslare AC-F Series Installation And Programming Manual

Programming
5.6

Changing the Normal/Secure Code

• When the Auxiliary mode is 1, 2, 3 or 4, the auxiliary input takes
priority over the Normal/Secure code.
• Code 0000 erases and deactivates the Normal/Secure code.
To change the Normal/Secure code:
1. Enter Programming mode.
2. Press 4 to enter Menu 4.
The left LED flashes red.
3. Enter the new 4-digit Normal/Secure code.
You hear three beeps.
The system returns to Normal mode.
5.7

Changing the Normal/Bypass Code

The Normal/Bypass code is also used to turn the door chime off
and on. Chime only functions with the BL-D40 external sounder.
• The chime is only heard when the Lock Strike relay is activated
by a valid code entry.
• Code 0000 erases and deactivates the Normal/Bypass code.
To change the Normal/Bypass code:
1. Enter Programming mode.
38 AC-F/G4x Series Installation and Programming Manual
Green
Red Green
Green
Green