Rosslare AYC-Ex5 Instruction Manual page 18

Reader Functionality
Entering Programming Mode
1) Press the # key 4 times.
• Transmit LED will turn off.
• Program LED will turn red.
2) Enter your 4 digit Programming
Code. If the Programming Code is
valid, the door LED will turn
green and the AYC-Ex5 will
be in Programming Mode.
•
•
Exiting Programming Mode
1) To exit the Programming Mode at any time press #:
• You will hear a beep
• The Program LED will be
off
• The Transmit LED will turn red
2) This indicates that the AYC-Ex5 has returned to Transmit
Mode.
3) Wrong entries may reset the reader back to Transmit Mode.
While in Programming Mode if no key is pressed for 30
seconds the AYC-Ex5 will exit Programming Mode and return
to Transmit Mode.
Page 17
Note:
The factory 4-digit Programming Code is 1234.
If a Programming Code is not entered within 30 seconds, the
AYC-Ex5 will return to Transmit Mode.
Mode/Transmit
? ? ? ?
Mode/Transmit
Mode/Transmit
Red
AYC-Ex5 family manual
Door/Program
Red
Door/Program
Green
Door/Program