Changing Auxiliary Code; Changing The Programming Code - Rosslare AYC-Ex5 Instruction Manual

Controller Functionality

Changing Auxiliary Code

The Auxiliary Code is mainly used as a method to quickly test the
Auxiliary Relay during installation.
When the first user is added to the controller, the default Auxiliary
Code will automatically be deleted. Once the code is
programmed again, it will not be deleted with the entry of
additional User Codes.
1) Enter Programming mode.
2) Press "2" to enter Menu 2.
• The Mode LED will turn
orange.
3) Enter the new code you wish to
set as the auxiliary Code.
4) System returns to Normal
mode.
• You will hear three beeps.
•
•
•
•

Changing the Programming Code

1) Enter Programming mode.
2) Press "3" to enter Menu 3.
• The Mode LED will turn
green.
3) Enter the new code you wish to
set as Programming Code
Page 39
Note:
Auxiliary code does not work in the Secure Mode.
Wrong entries will return the controller to Normal Mode.
Code 0000 will erase the Auxiliary Code.
The factory Default 4-digit Auxiliary Code is 0852.
Mode/Transmit
2
Mode/Transmit
Orange Green
? ? ?
Mode/Transmit
Green
Mode/Transmit
3
Mode/Transmit
Green
? ? ?
AYC-Ex5 family manual
Door/Program
Green
Door/Program
?
Door/Program
Door/Program
Green
Door/Program
Green
?