Table of Contents
Advertisement
6.4 Setting of auto calibration
6.4.1 Auto calibration
Auto calibration is automatically carried out at the time when zero and span calibration are set.
Before changing the setting of auto calibration, set the ON/OFF to OFF.
(1) Enter the "Setting of Auto Calibration"
screen from the user mode, and the
display shown at right appears. Operate
the
or the
aligned with a desired item and press the
ENT
key.
(2) In the "Setting of Auto Calibration"
screen that appears, perform the value
entry or the setting. For the value entry
or setting change, use the
key, and the
the right.
After setting, press the
calibration is carried out by the entered
setting value.
Description of setting items
To close "Setting of Auto calibration"
To close the "Setting of Auto calibration" or cancel
this mode midway, press the
A previous screen will return.
key until the cursor is
or the
key to move the cursor to
ENT
key, and auto
ESC
key.
40
(
)
End of Auto Calibration Setting
ENT
Press the
or
the
key, and
date and time are
displayed
alternately.
ENT
INZ-TN2ZPA-E
Advertisement
Table of Contents
