Table of Contents
Advertisement
6.5 Setting of auto zero calibration
6.5.1 Auto zero calibration
Auto zero calibration is automatically carried out at the time when zero calibration is set.
Components for which a calibration is to be made are determined by setting of auto calibration
component in Section 6.2.4.
Before changing the setting of auto zero calibration, set the ON/OFF to OFF.
(1) Enter the "Setting of Auto Zero Calibra-
tion" screen from the user mode, and the
display shown at right appears. Operate
the
or the
aligned with a desired item and press the
ENT
key.
(2) In the "Setting of Auto Zero Calibration"
screen that appears, perform the value
entry or the setting. For the value entry
or setting change, use the
key and the
the right.
After setting, press the
auto zero calibration is carried out by the
entered setting value.
Description of setting items
To close "setting of Auto Zero Calibration"
To close the "Setting of Auto Zero Calibration"
or cancel this mode midway, press the
A previous screen will return.
key until the cursor is
or the
key to move the cursor to
ENT
key, and
ESC
key.
46
(
End of Auto Zero Calibration Setting
ENT
)
Press the
or
the
key, and
date and time are
displayed
alternately.
ENT
INZ-TN2ZPA-E
Advertisement
Table of Contents
