Description Of Display And Operation Panels; Name And Description Of Operation Panel - Fuji Electric ZPA Instruction Manual

5. DESCRIPTION OF DISPLAY AND OPERATION PANELS

This section describes the display unit and operation panel of the analyzer unit. It also explains the name
and description of function on the operation panel.

5.1 Name and description of operation panel

Display unit
Operation panel T e on i uration is as s o n elo
(1) MODE key
(2) SIDE key
(5) ESCAPE key
Name
(1) MODE key Used to switch the mode.
(2) SIDE key Used to change the selected item (by
moving the cursor) and the numeral digit.
(3) UP key Used to change the selected item (by
moving the cursor) and to increase the
numeral value.
(4) DOWN key Used to change the selected item (by
moving the cursor) and to decrease the
numeral value.
Display unit
T e easure ent s reen an t e settin ite s are isplaye
(7) ZERO key
MODE ZERO
ESC
Description
(5) ESC key
(6) ENT key
(7) ZERO key
(8) SPAN key
20
Operation panel
(8) SPAN key
SPAN
(4) DOWN key
(3) UP key
ENT
(6) ENTER key
Name
Used to return to the previous screen or
cancel the setting midway.
Used for confirmation of selected items
or values, and for execution of calibra-
tion.
Used for zero calibration.
Used for span calibration.
Description
INZ-TN2ZPA-E