Table of Contents
Advertisement
6.3.3 Peak alarm setting
When the peak number of times CO concentration exceeds the upper limit value during measure-
ment reaches the set number, an alarm is provided.
The peak alarm and this setting screen appear only when an option is added.
MODE
(1) Press the
mode, and the User mode appears.
(2) Point the cursor to "Setting of Peak
Alarm" by pressing the
Press the
ENT
(3) In the "Setting of Peak Alarm" item
selection screen that appears, point the
cursor to any item you want to set by
pressing the
key.
(4) Then, enter numeric values and perform
the setting.
Entering the numeric values or setting the
items should be carried out by using the
key.
After setting, press the
values are saved.
Description of setting items
key in the Measurement
or
key.
key.
or
key. Press the
ENT
ENT
key, and the set
38
or
End of Peak Alarm Setting
MODE
ENT
(
)
ENT
(
)
ENT
(
)
INZ-TN2ZPA-E
Advertisement
Table of Contents
